How to Replace Spare Tire of a Car: A Simple Guide 2025

In this blog, we’ll walk you through a simple step-by-step process for safely replacing a flat tire with a spare.

CAR MAINTENANCE

by Shashidhar Shetty

3/9/20253 min read

It’s not always a wonderful feeling to see a flattened tire in your car whenever you want to go somewhere or plan for a sudden trip. If you know how to do it, changing an automobile's spare wheel is a simple process that can save both money and time.

Once you follow these simple steps, you can quickly finish this task and get back on the road in no time.

What You Need:

Before you start the tire-changing job, make sure to check the car’s trunk for the tools below.

· Properly Inflated Spare Tire

· Jack Assembly

· Wheel Spanner

· Wheel Blocks {Optional}

· Reflector Triangle

1. Park the car safely:

· Make sure to park the car on a flat road surface and away from the traffic zone if possible.

· To alert other drivers on the road, turn ON the hazard warning lights & apply the parking brake.

· Shift the gear lever into 1st gear in case of a manual transmission and put it in “P” mode in an automatic transmission.

· To avoid the car moving forward or backward, place the wheel blocks in front of or behind the wheels.

2. Remove Wheel Nuts:

· Loosen all the wheel nuts of the flat tire with a wheel spanner before hoisting the car.

· Wheel nuts need to be removed after the flat tire is lifted off the ground, so do not remove them all at once.

· If the wheel nuts are too tight, push the wrench with your foot or body weight.

This Extendable Wheel Wrench Spanner tool from Amazon is excellent at reducing the effort of loosening tight wheel nuts with minimum effort.

3. Lift with a Jack:

· Find the correct jack point of your car near the flat tire and use car’s owner manual if unsure where it is located.

· Place the jack under the lifting point and slowly raise the jack with the help of a jack handle or a jack wrench tool, which accelerates the lifting process and saves time/energy.

· Check the car for proper stability on the jack before moving forward.

Universal Car Jack Ratchet is a must-have for any car owner. Its innovative design allows for quick and easy lifting of vehicles, making tire changes and repairs a breeze.

4. Take out the Flat Tire:

· Remove all the wheel nuts and keep them in a safe place.

· Pull the flat tire in a straight-off position and place it flat on the ground.

5.Install Spare Tire:

· Align the spare wheel rim holes with the stud bolt and hand tighten the wheel nuts as much as possible.

6. Remove the Jack:

· Slowly lower the car by operating the jack until the spare tire contacts the ground.

· Fully tighten all the wheel nuts in diagonal pattern to ensure even pressure on the wheel.

7. Re-Check and Drive Safe:

· Always ensure that all the wheel nuts are tight before moving the vehicle after changing spare tire.

· Place the flat tire and other tools in car’s trunk.

Conclusion:

Changing of car tire is always a headache for many vehicle owners and if you follow these simple process mentioned in this article, you can complete this job very easily during a tire puncture or burst.

Nowadays, car manufacturers are eliminating spare tires to reduce additional weight, to save space and for cost efficiency etc.

Anyways you must know about the tire replacement procedure to make yourself comfortable in an unwanted road hassles.